Revolution Imager

Wi-Fi Emitter for Revolution Imager

$ 89.99 ~~$ 149.99~~

The Wi-Fi Emitter allows you take the video signal from the Revolution Imager and broadcast it over Wi-Fi to your compatible Android or iOS device! This gives you an extra degree of freedom when you're outside and sharing the wonders of the universe with others. The Wi-Fi emitter is simple to connect and can run from the 12v battery connection as the other components in the Revolution Imager System.

As this device can be power-hungry we recommend upgrading to the larger 9800mAh battery pack.

Note: If you have problems downloading the WIFIAV app on Android you can download the "APK" by clicking here.

For more information on how to use the emitter please see our "How do I use the Wi-Fi Emitter?" page.

Please Note:

If you are using a Samsung Mobile phone (including S7, S8, etc.) please follow these instructions:

Press RESET button 4 times to reset and switch to Samsung Mode
Switch network to WIFI SSID: WIFIAV-SAMSUNG default password: 12345678

To Reset to non-Samsung android device please hold reset for 10 seconds.

For the WIFIAV-HD Emitter only -

Android: Scan QR code on the user manual, or go to: http://www.henries.com.cn/Support/Download/WIFIAV-HD/

Hold down the black button on the Wifi Emitter until the the link light flashes blue.

Once your Wifi Emitter is in pairing mode (flashing blue) your mobile device will be able to connect to the wifi emitter from your device's wifi setting, password to the "WIFIAV-HD" signal is: 12345678

iPhone:

Download WifiAV-HD from the App Store

Hold down the black button on the Wifi Emitter until the the link light flashes blue.

Once your Wifi Emitter is in pairing mode (flashing blue) your mobile device will be able to connect to the wifi emitter from your device's wifi setting, password to the "WIFIAV-HD" is: 12345678

Checkout this short video demonstration: